Posts

LYNX Optical to Optical Converter OET 1940MC

/in /by

OET 1940MC, part of the OET 1940 series of 10Gbit/s ethernet to fiber transceivers by LYNX Technik, is an optical to optical converter.

The OET 1940MC is perfect for situations where conversion from multimode fiber into a singlemode CWDM fiber is necessary.

This particular module includes the multimode SFP. Specify the optional CWDM SFP for the required wavelength. Additionally, two fiber links are required, one for TX, one for RX (LC connections).

In general, the OET 1940 series of compact ethernet to fiber optic converters extends the reach of 1Gbit/s or 10Gbit/s electrical ethernet signals over long distances. The OET 1940MC is just one of the unique solutions LYNX offers.

Various fiber adapter options are available for the OET 1940 series:

LYNX_OET1940_FiberAdapter_TEVIOS

Contact us for more information about the optical to optical converter OET 1940MC by LYNX.

Electrical to Fiber Optic Converter OET 1940 by LYNX

/in /by

The OET 1940 series by LYNX Technik of ethernet to fiber transceivers includes the CWDM version, an electrical to fiber optic converter for CWDM multiplexed fiber systems.

This particular module features a single 10Gbit/s RJ45 electrical connection. Specify the optional CWDM SFP for the required wavelength. Two fiber links are required, one for TX, one for RX (LC connections).

LYNX_OET1940_transceiver_TEVIOS.

These modules extend the reach of 1Gbit/s or 10Gbit/s electrical ethernet signals across long distances.

Overall, the OET 1940 features include:

  • Standard Ethernet/Optical signals of 10Gbit/s or 1Gbit/s support
  • 2x 10Gbit/s transceiver ports (Electrical/Optical)
  • Maximum throughput of 20Gbit/s (full duplex)
  • Distances up to 25km over singlemode fiber supported
  • Power & signal present LED indication
  • Hot swapping & hot plugging support

Contact us for more information about the electrical to fiber optic converter OET 1940 by LYNX Technik.

OET 1940MS: Unique Ethernet to Fiber Transceiver by LYNX

/in /by

The OET 1940MS is a relatively unique 10Gbit/s ethernet to fiber transceiver by LYNX Technik.

LYNX_OET1940_10Gbit:sEthernetFiberTransceiver_TEVIOS

It supports standard ethernet/optical signals of 10Gbit/s or 1Gbit/s on a maximum throughput of 20Gbit/s (full duplex). Additionally, it supports distances of approximately 25km over singlemode fiber.

The OET 1940MS features power and signal present LED indication and supports hot swapping and hot plugging.

All in all, the OET 1940 series of compact ethernet to fiber optic converters extends the reach of 1Gbit/s or 10Gbit/s electrical ethernet signals across long distances. More specifically, the MS version is an optical to optical converter specifically created for situations where a conversion between multimode fiber and singlemode fiber is required. This particular module includes: multimode SFPs and singlemode SFPs, each with two fiber connections (one for TX, one for RX).

Contact us for more information about the LYNX OET 1940MS ethernet to fiber transceiver solution.

LYNX Releases 48G Fiber Transmission System

/in /by

LYNX Technik recently released the OTR 1A42, an extendible 8K fiber transmission system for its yellobrik series.

This new fiber solution is ideal for transmitting multiple uncompressed 12G SDI streams. It allows users to extend 48Gbit/s (96Gbit/s in combination with the OTR 1A41) from a 12G infrastructure with a single cable! Transmit a wide range of additional channels thanks to the UPG port.

LYNX_OTR 1A42_FiberTransmissionSystemBanner_TEVIOS

This particular yellobrik solves the issue of transporting real-time, uncompressed 8K content over 10km (6.2 miles) with zero signal degradation or loss. More specifically for 8K applications, the signal is split over four 12G SDI links (48G) and supports full 8k resolution (up to 7680×4320@60 Hz). Each of the four 12G/6G/3G/HD/SD-SDI channels are fully independent & individually reclocked.

The self-contained kit includes:

  • 8K optical transmitter
  • 8K optical receiver
  • Power supply (excluding fiber cable)

Additionally, pair the OTR 1A42 with the yellobrik OTR 1A41 to enable 96Gbit/s throughput over fiber system.

Contact us for more information about the OTR 1A42 fiber transmission system.

LYNX Launches New yellobrik Ethernet | Fiber Transceivers & Converters

/in /by

LYNX Technik recently announced seven new fiber yellobriks designed to extend the reach of 10Gbit/s ethernet signals over fiber.

Yellobrik Ethernet | Fiber converters offer stable, high-speed signal connections between locations and enable the connections of copper-based Ethernet equipment to single & multi-mode fiber optic cable. Convert fiber to copper ethernet, copper to fiber, fiber to fiber (multi-mode <> single-mode) or simply extend electrical ethernet signals over a bi-directional single fiber. These new yellobriks are hot swappable and hot pluggable while being user friendly.

Multiple models exist: the OET 1910, OET 1940 & OBD 1910. Use any of the them as standalone units or mount them onto 19″ yellobrik rack trays.

LYNX_OET1910_10Gbit:sEthernetFiberTransceiver_TEVIOS

Firstly, the OET 1910 models offer fiber <> copper conversion and have two 10Gbit/s ports per module. In full duplex mode, OET 1910 offers a maximum throughput of 20Gbit/s.

LYNX_OET1940_10Gbit:sEthernetFiberTransceiver_TEVIOS

Secondly, the OET 1940 models provide fiber <> copper conversion and fiber to fiber conversion making them multi-functional. They support CWDM fiber transmission for the full 18 wavelengths of coverage. Various SFP fiber transceiver modules are also available.

LYNX_OBD1910_10Gbit:sEthernetFiberbidirectionalTransceiver_TEVIOS

Finally, the OBD 1910 models offer a 10Gbit/s ethernet extension over a bi-directional single fiber. They also include two ports per module (maximum throughput of 20Gbit/s in full duplex mode).

Contact us for more information about the new yellobrik Ethernet | Fiber Transceivers & Converters by LYNX Technik.

P Fiber II Optical Fiber Extender by LanSee

/in /by

The P Fiber II PFP 3050 optical fiber extender by LanSee transmits all signals (video streams, Genlock signal path & Ethernet communication) without latency over one optical fiber cable.

LanSee_PFiberII_opticalfiberextender_TEVIOS

Using a hybrid optical cable, the camera can be up to 200m away from the control room. However, if the camera is powered locally this distance increases to 10km.

The Camera Unit (camera side) is designed to fit the shape of Panasonic PTZ cameras, while the Base Unit (control room side) comes in a 19″ rackable chassis form-factor.

Lastly, P FIBER II supports 12G-SDI.

LanSee_PFiberII_opticalfiberextender_withcamera_TEVIOS

To summarize:

  • Compact & robust Camera Unit
  • 1U 19″ 200mm depth rackable Base Unit
  • 1 x 3G-SDI & 1 x 12G-SDI downlink
  • Genlock (Black-Burst or Tri-Level) signal path
  • 10/100/1000Mbps LAN Ethernet dual link, 2 x RJ45 ports on Base Unit
  • Power over Ethernet (POE++) on RJ45 port on Camera Unit

Contact us for more information about the P Fiber II optical fiber extender.

TIDY BOX Fiber Extender By LanSee

/in /by

The TIDY BOX by LanSee is a Compact SDI + LAN Fiber Extender designed to transport video and gigabit Ethernet over fiber.

The TIDY BOX range provides 1 to 2 SDI with 2 x GbEth ports. It is available in SD to 3G and SD to 12G versions. Any fiber connector is available (no SFP) and there is a built-in PSU. The 100-240VAC 50/60Hz power supply is integrated, and the TIDY BOX features an IEC320 C13 universal power socket.

Everything is housed in a small yet heavy-duty stainless steel box with protective handles for the connectors. A 2U 19″ rackmount model is also available, TIDY RACK, which houses up to 8 TIDY BOX.

LanSee_Tidy_Box_rack_TEVIOS

SDI features:

  • Autodetect SD, HD, 3G, 6G* and 12G* SDI (depends on version)
  • Indicator lights for input/output
  • Independent reclocking of input & output
  • Transparent to embedded data
  • No latency

LAN features:

  • 10/100/1000 Mbs – Half & Full Duplex
  • 2x RJ45 ports (switch mode)
  • Traffic & throughput indicators
  • Transparent to Dante and other IP protocols

Fiber Optic features:

  • Dual Single Mode Fiber
  • LC/UPC Duplex connector (optional Neutrik connector)
  • Up to 10km range

Contact us to learn more about the TIDY BOX Compact SDI + LAN fiber extender by LanSee.

LYNX Introduces 12Gbit Bidirectional SDI/Fiber Transceiver

/in /by

LYNX Technik releases their OBD 1410 12Gbit Bidirectional SDI/Fiber Transceiver!

This cost-effective, bidirectional fiber optic to SDI transmitter and receiver relies on a single fiber link supplied in a compact self-contained package.LYNX_OBD1410_Transceiverworkflow_TEVIOS

This particular yellobrik module comes in pairs: Type A and Type B work together in a WDM closed loop application. They each have an electrical SDI in and SDI out connection. Additionally, each channel is fully independent, allowing for different standards and formats of SDI video. The modules are fully compatible with 3Gbit Level A and Level B formats. Plus, before conversion they auto-detect & re-clock 1.5Gbit, 3Gbit, 6Gbit or 12Gbit SDI sources.

Finally, this solution cannot be integrated into a CWDM multiplexed system. The system used WDM optical multiplexing and therefore should only be used in point to point applications.

Contact us for more information about the OBD 1410, LYNX’ latest 12Gbit Bidirectional SDI/Fiber Transceiver.

LYNX Releases Bi-Directional Quad 12G SDI/Fiber Transceiver

/in /by

The OTR 5444 by LYNX Technik is a quad-channel bi-directional 12G SDI/Fiber transceiver for the rack and card-based Series 5000 platform.

The OTR 5444 delivers uncompressed 4K signals over fiber across short & long distances. This transceiver module provides a bi-directional electrical to optical and optical to electrical conversion solution over four independent channels. It is suitable for SDI video signals up to 12Gbit/s and supports up to 8 modules in a standard 2RU frame. Optional fiber SFP sub-modules are also available.

Lynx Bi-Directional SDI/Fiber transceiver _TEVIOS

In addition to the four bi-directional 12G SDI high-density micro BNC electrical interfaces, the OTR 5444 also consists of four 12G SDI optical inputs and four 12G SDI optical outputs arranged in the optical TR slots. The card is configurable via the APPolo control software.

In brief, the OTR 5444 features:

  • Bi-directional electrical to optical & optical to electrical conversion up to 12G SDI
  • 4 independent 12G SDI Channels (8K quad-channel optical <> electrical conversion)
  • 4 x Optical Transceivers (TR)
  • 4 x High-density BNCs (TR)
  • Incoming & outgoing 12G SDI signals are reclocked
  • LYNX APPolo Control System: remote control, status monitoring & error reporting
  • Hot swappable

Contact us for more information about this quad-channel bi-directional SDI/Fiber transceiver by LYNX Technik.

New Yellobrik Dual 12G SDI Fiber Transmitter

/in /by

LYNX Technik announces its latest yellobrik solution: a 12Gbit Dual Channel SDI Fiber Transmitter with CWDM technology!

LYNX_ Yellobrik 12Gbit Fiber Transmitter _TEVIOS

Both cost-effective and flexible, this new yellobrik model (OTT 1442) transmits uncompressed 12G SDI video signals over fiber as well as over long distances (up to 10 km). The CWDM technology combines multiple signal wavelengths into one fiber optic cable. This model covers all 18 CWDM wavelengths via nine pairs of wavelength choices.

LYNX_Yellobrik 12Gbit Fiber Transmitter_OTT1442

What’s more, this yellobrik 12Gbit Fiber Transmitter pairs with LYNX’ fiber receivers and multiplexers/demultiplexers. This in turn creates a cost-effective CWDM fiber system for up to 18 signals on one fiber link. Alternatively, this yellobrik also acts as a standalone device. It can be individually mounted or used with the 19″ yellobrik rack trays, building a larger 12G transport solution.

The two input and outputs operate independently from one another. They are also fully automatic. Incoming signals (up to 12G SDI) are auto-detected before being transmitted, ensuring that different formats and standards are carried on each channel. In other words, this is truly a plug-and-play module.

Contact us for more information.