Posts

LYNX Optical to Optical Converter OET 1940MC

/in /by

OET 1940MC, part of the OET 1940 series of 10Gbit/s ethernet to fiber transceivers by LYNX Technik, is an optical to optical converter.

The OET 1940MC is perfect for situations where conversion from multimode fiber into a singlemode CWDM fiber is necessary.

This particular module includes the multimode SFP. Specify the optional CWDM SFP for the required wavelength. Additionally, two fiber links are required, one for TX, one for RX (LC connections).

In general, the OET 1940 series of compact ethernet to fiber optic converters extends the reach of 1Gbit/s or 10Gbit/s electrical ethernet signals over long distances. The OET 1940MC is just one of the unique solutions LYNX offers.

Various fiber adapter options are available for the OET 1940 series:

LYNX_OET1940_FiberAdapter_TEVIOS

Contact us for more information about the optical to optical converter OET 1940MC by LYNX.

Electrical to Fiber Optic Converter OET 1940 by LYNX

/in /by

The OET 1940 series by LYNX Technik of ethernet to fiber transceivers includes the CWDM version, an electrical to fiber optic converter for CWDM multiplexed fiber systems.

This particular module features a single 10Gbit/s RJ45 electrical connection. Specify the optional CWDM SFP for the required wavelength. Two fiber links are required, one for TX, one for RX (LC connections).

LYNX_OET1940_transceiver_TEVIOS.

These modules extend the reach of 1Gbit/s or 10Gbit/s electrical ethernet signals across long distances.

Overall, the OET 1940 features include:

  • Standard Ethernet/Optical signals of 10Gbit/s or 1Gbit/s support
  • 2x 10Gbit/s transceiver ports (Electrical/Optical)
  • Maximum throughput of 20Gbit/s (full duplex)
  • Distances up to 25km over singlemode fiber supported
  • Power & signal present LED indication
  • Hot swapping & hot plugging support

Contact us for more information about the electrical to fiber optic converter OET 1940 by LYNX Technik.

OET 1940MS: Unique Ethernet to Fiber Transceiver by LYNX

/in /by

The OET 1940MS is a relatively unique 10Gbit/s ethernet to fiber transceiver by LYNX Technik.

LYNX_OET1940_10Gbit:sEthernetFiberTransceiver_TEVIOS

It supports standard ethernet/optical signals of 10Gbit/s or 1Gbit/s on a maximum throughput of 20Gbit/s (full duplex). Additionally, it supports distances of approximately 25km over singlemode fiber.

The OET 1940MS features power and signal present LED indication and supports hot swapping and hot plugging.

All in all, the OET 1940 series of compact ethernet to fiber optic converters extends the reach of 1Gbit/s or 10Gbit/s electrical ethernet signals across long distances. More specifically, the MS version is an optical to optical converter specifically created for situations where a conversion between multimode fiber and singlemode fiber is required. This particular module includes: multimode SFPs and singlemode SFPs, each with two fiber connections (one for TX, one for RX).

Contact us for more information about the LYNX OET 1940MS ethernet to fiber transceiver solution.