Posts

PLR64K by Nixer Used in Language Commentary Position

The PLR64K by Nixer is a 64 channel Dante network monitor that makes it possible to access two independently selectable sources via a simple remote control panel.

Nixer_PLR64K_remotecontrol_4units_TEVIOS

 

This remote controller’s primary function is to independently select each output from the incoming Dante stream.
The wall plate remote controller is equipped with:
  • one OLED display displaying the selected channel name & the output signal level
  • a pair of switches per output for channel selection from the list of available Dante channels
  • 3 pin male XLR per output for headsets

Contact us for more information about the PLR64K and its use in language commentary positions.

AVT Introduces new MAGIC ACX Dante WAN Bridge

The MAGIC ACX Dante WAN Bridge by AVT is a multi-channel PCM system that enables transmission of up to 32 uncompressed audio signals via wide area networks (WAN). This enables Dante Network connections over large distances.

AVT_MAGIC Dante WAN Bridge_audiotransmission_TEVIOS

More specifically, the coding is done via PCM16/PCM24/PCM32. The integrated 32-channel Dante interface provides audio connection for the audio inputs/outputs. It also features redundant GbE interfaces and supports AES67. What’s more, manage up to 10 systems (including graphic surveillance) from 5 workplaces thanks to the user-friendly operating software.

Limited maximum latency of Dante in wide area networks, high jitter and possible time differences can make reliable transmission difficult. The MAGIC ACX Dante WAN Bridge solves these issues by offering a jitter buffer that includes an automatic mode and intelligent sample rate adaption (SRA).

Marketing & Sales Assistant Lukas Mahler presents the AVT MAGIC ACX Dante WAN Bridge:

Contact us for more information.

Dante support & integration coming soon to BirdDog products!

BirdDog will soon bring Dante support to all its hardware products as well as integration into its Comms Pro audio intercom system and its new Dante NDI Bridge application.

Dante for Hardware

Soon all BirdDog products (Studio NDI, Mini, 4K Converters, Wallplates, SDM Modules & PTZ range cameras) will support Dante audio. Input of Dante audio can be streamed out as NDI. If there is an audio output, then audio tracks can be converted from the NDI stream to Dante audio.

BirdDog_Hardware_Dante Support & Integration_TEVIOS

Dante Comms Pro Integration

Use hardware from other manufactures with BirdDog’s Comms Pro, its revolutionary audio intercom system. For instance, Dante enabled belt packs and Dante enabled Comms boxes will be compatible.

BirdDog_CommsPro_Dante Support & Integration_TEVIOS

Dante NDI Bridge Application

This Window 10 application flips audio tracks between NDI and Dante in sub-frame latency. It supports up to 3 stereo pairs, meaning Dante NDI Bridge can receive 3 NDI streams and create 3 stereo pairs of Dante audio. It can also receive a single NDI stream and create 3 Dante stereo audio pairs. The reverse also applies, thanks to Dante NDI Bridge.

BirdDog_NDIBridge_Dante Support & Integration_TEVIOS

Contact us for more information about Dante support and integration!

Introducing the RL64 Dante by Nixer

The RL64 by Nixer is a 1U 19 inch rack mounted Dante monitoring and mixing unit. The monitor/mixer has two modes of operation.

Nixer_RL64_monitormixer_TEVIOS

The mixing mode is capable of mixing up to 64 Dante channels at 48kHz (32 channels at 96kHz). The microphone input (via a headphone connector) and AES input create a 67 into 2 mixer. The second mode is a simple Listen mode. In this mode, touching a channel immediately routes to the LR output and cancels previous selections.

Nixer_RL64Dante_menu_TEVIOS

The LR bus’ outputs are presented via inbuilt 4mm x 9mm full range speakers or via a 3.5mm headphone jack. If a headphone jack is inserted, the speakers automatically mute. Simultaneous outputs are available thanks to the stereo balanced line outputs and AES output which are accessed on the rear of the RL64 Dante via XLR connectors. The mix output is routed to the Dante output as well.

Contact us for more information!

Nixer launches PLR64K Dante – 64 channel Dante network monitor for use with remote controller

The PLR64K Dante is specifically designed to allow an operator/commentator to access any two independently selectable sources on the Dante network via a simple remote control panel. Each display shows Channel Name and provides an output meter level. Balanced XLR outputs provide feeds to local speakers or headphones. It’s perfect for on-air and live applications where critical confidence monitoring is essential.

This three-part kit consists of the PLR64 Dante, 2 Gang Wall Plate Remote controller and Remote Cable 1.5M D-sub cable. 

Typically, the PLR64 is be mounted to a wall or beneath a desk and then wired via the remote cable to the 2 gang wall plate remote controller. 

The remote controller allows the independent selection for each output from the incoming Dante stream. Each output displays the selected Dante channel name and output signal level on the OLED display. Channel selection is made via scrolling up/down the available Dante channels via a pair of switches for each output. Each output is presented on a 3 pin male XLR. The signal is electronically balanced and provides +21dBu for 0dBFS of signal level.

Contact us to schedule a meeting at IBC !

Rack Mount Dante Network Confidence Monitoring by Nixer now available

Nixer’s 2U 19-inch rack mounted Dante monitoring and diagnostic unit allows for the monitoring of up to 64 Dante channels at 48kHz (or 32 channels at 96kHz).

Nixer_RDDante_diagnosticsandconfidencemonitoring_TEVIOS

The signals are available to the user via a 6.35mm headphone jack or via 75mm built-in full range speakers which are mounted in optimized ported cabinets to supply high quality sound. The speakers are automatically muted when a headphone jack is inserted.

Simultaneous outputs are also available in the form of the stereo balanced line outputs and AES output which can be accessed via XLR connectors on the rear of the RD Dante.

Contact us for more information!

TEVIOS appointed NIXER dealer !

NIXER designs and manufactures high quality and cost effective Dante and AES67 monitoring and diagnostics tools !

NIXER Portable Dante is small portable Dante unit, which allows the monitoring of up to 64 Dante channels at 48kHz (32 channels at 96kHz). The unit is equipped with inbuilt speakers and headphone jack.

 

Stereo balanced line outputs and AES output are also available via a 15way D-type.

The device is operated and controlled via the large 5.0” colour LCD touch panel.
A simple and elegant intuitive menu allows to access all the features of the Portable Dante very quickly.

The Portable Dante can be powered via PoE or via USB.

The solution also exist in a rack mount version :

Contact us for more information !