Posts

Compact 64 channel Dante Audio Monitor by Nixer: RL64

The Nixer RL64 is a 1U 19inch rack mounted Dante monitoring and mixing unit capable of mixing up to 64 Dante channels!

Nixer_RL64_monitormixer_TEVIOS

In mixing mode, mix up to 64 Dante channels at 48kHz or 32 channels at 96kHz. Plus, the microphone input (via a headphone connector) and AES input create a 67 into 2 mixer. In listening mode, simply touch a channel to instantly route to the LR output and cancel the previous selection.

Nixer_RL64Dante_menu_TEVIOS

The LR bus’ outputs are presented via inbuilt 4mm x 9mm full range speakers or via a 3.5mm headphone jack. The speakers automatically mute when a headphone jack is inserted. Simultaneous outputs are available thanks to the stereo balanced line outputs and AES output, accessed on the rear of the RL64 Dante via XLR connectors. The mix output is routed to the Dante output as well.

Control the RL64 with the intuitive navigation menu on the 24-bit color LCD and capacitive touch panel. This high-res screen presents comprehensive metering, routing and status information.

Nixer_RL64_rearpanel_TEVIOS

The rear of the RL64 Dante features 2x balanced line outputs on 3 pin male XLRs and AES output on 3 pin male XLR. Configure these outputs to follow the main volume settings of the speakers/headphones or set them to follow the main Mute control.

Finally, watch the introductory video by Nixer CEO Nick Fletcher here.

Contact us for more information about the RL64 Dante Audio Monitor by Nixer!

Nixer VIDEO Highlights the RL64 Dante Audio Monitor

In this video, Nixer Pro Audio CEO Nick Fletcher introduces and presents the RL64 Dante 1U rack mounted 64 channel Dante audio monitor.

In short, this 19 inch rack mounted Dante monitoring and mixing unit, offers two modes of operation. The first mode is a mixing mode. Mix up to 64 Dante channels at 48kHz  or 32 channels at 96kHz plus microphone input and AES input, creating a 67 into 2 mixer. The second mode is a simple listen mode. Touching a channel instantly routes to the LR output and cancels the previous selection.

Read the full data sheet here.

Contact us for more information about the Nixer RL64 Dante Audio Monitor.

Introducing the Nixer RL256 Dante Monitor

The latest addition to the Nixer Pro Audio lineup is the RL256 Dante monitor, designed for operators to provide cost-effective monitoring across multiple networks with high channel counts. More specifically, the RL256 has 4 x Dante ports (64 channels per port) totaling 256 channels being monitored at one time.

Simply load the RL256 with up to 4 ports of Dante, thus enabling the monitoring of 256 channels. Operate the unit via swipe gestures on the touchscreen. For instance, swipe down to switch to alternative ports. Listen to audio via the built-in speakers or headphone output.

Nick Fletcher, CEO of Nixer, introduces the RL256 in this short video.

Contact us for more information about the Nixer RL256 Dante monitor.

Nixer PLR64K: 64 Channel Dante Network Monitor VIDEO

CEO Nick Fletcher of Nixer Pro Audio presents the features and benefits of the 64 channel Dante network monitor, PLR64K.

To summarize, PLR64K is uniquely designed for operators/commentators to access any two independently selectable sources on the Dante network. This is possible via a simple remote control panel. Each display features the channel name and output meter level.

The PLR64K Dante kit consists of one each:

  • PLR64 Dante unit
  • 2 Gang Wall Plate Remote controller
  • Remote Cable 1.5M D-sub cable

Find the full data sheet here.

Contact us for more information about the Nixer 64 channel Dante network monitor, PLR64K.

Nixer RD Dante Network Monitoring & Diagnostics VIDEO

RD Dante, the flagship product of Nixer Pro Audio, is a 2U 19-inch rack mounted 64 channel (at 48kHz) or 32 channel (at 96kHz) monitor. It features 2 x 25W amplifier, dual redundant PSUs, redundant network connectors and AES67 compatibility.

CEO Nick Fletcher provides more information in the video below:

Specifications

  • Monitor 64 Dante channels at 48kHz (32 channels at 96kHz)
  • Output 64 Dante channels at 48kHz (32 channels at 96kHz)
  • Sample rates supported: 44.1kHz, 48kHz, 88.2kHz, 96kHz
  • Bit Depth supported: 16bit, 24bit, 32bit
  • AES67 compatible
  • 64 channel meters
  • Dual Balanced Line Outputs 0dBFS = +21dBu maximum output into 600ohms 2x 3pin male XLR connectors
  • Dual 1Gbps RJ45 Dante inputs

Contact us for more information about the RD Dante by Nixer.

PD Dante Routing Matrix explained in Nixer video

Nixer Pro Audio explains how to use the routing matrix of the Nixer PD Dante. Route any of the four input sources (Main Mix, Mic/Line, AES in and Test Signal) to any of the six outputs (Headphones/Speakers, Line Out, AES Out and Dante A, B and C). Find out how in their latest video:

Contact us for more information about the Nixer PD Dante routing matrix.