Posts

LYNX Optical to Optical Converter OET 1940MC

OET 1940MC, part of the OET 1940 series of 10Gbit/s ethernet to fiber transceivers by LYNX Technik, is an optical to optical converter.

The OET 1940MC is perfect for situations where conversion from multimode fiber into a singlemode CWDM fiber is necessary.

This particular module includes the multimode SFP. Specify the optional CWDM SFP for the required wavelength. Additionally, two fiber links are required, one for TX, one for RX (LC connections).

In general, the OET 1940 series of compact ethernet to fiber optic converters extends the reach of 1Gbit/s or 10Gbit/s electrical ethernet signals over long distances. The OET 1940MC is just one of the unique solutions LYNX offers.

Various fiber adapter options are available for the OET 1940 series:

LYNX_OET1940_FiberAdapter_TEVIOS

Contact us for more information about the optical to optical converter OET 1940MC by LYNX.

OET 1940MS: Unique Ethernet to Fiber Transceiver by LYNX

The OET 1940MS is a relatively unique 10Gbit/s ethernet to fiber transceiver by LYNX Technik.

LYNX_OET1940_10Gbit:sEthernetFiberTransceiver_TEVIOS

It supports standard ethernet/optical signals of 10Gbit/s or 1Gbit/s on a maximum throughput of 20Gbit/s (full duplex). Additionally, it supports distances of approximately 25km over singlemode fiber.

The OET 1940MS features power and signal present LED indication and supports hot swapping and hot plugging.

All in all, the OET 1940 series of compact ethernet to fiber optic converters extends the reach of 1Gbit/s or 10Gbit/s electrical ethernet signals across long distances. More specifically, the MS version is an optical to optical converter specifically created for situations where a conversion between multimode fiber and singlemode fiber is required. This particular module includes: multimode SFPs and singlemode SFPs, each with two fiber connections (one for TX, one for RX).

Contact us for more information about the LYNX OET 1940MS ethernet to fiber transceiver solution.

LYNX Releases 48G Fiber Transmission System

LYNX Technik recently released the OTR 1A42, an extendible 8K fiber transmission system for its yellobrik series.

This new fiber solution is ideal for transmitting multiple uncompressed 12G SDI streams. It allows users to extend 48Gbit/s (96Gbit/s in combination with the OTR 1A41) from a 12G infrastructure with a single cable! Transmit a wide range of additional channels thanks to the UPG port.

LYNX_OTR 1A42_FiberTransmissionSystemBanner_TEVIOS

This particular yellobrik solves the issue of transporting real-time, uncompressed 8K content over 10km (6.2 miles) with zero signal degradation or loss. More specifically for 8K applications, the signal is split over four 12G SDI links (48G) and supports full 8k resolution (up to 7680×4320@60 Hz). Each of the four 12G/6G/3G/HD/SD-SDI channels are fully independent & individually reclocked.

The self-contained kit includes:

  • 8K optical transmitter
  • 8K optical receiver
  • Power supply (excluding fiber cable)

Additionally, pair the OTR 1A42 with the yellobrik OTR 1A41 to enable 96Gbit/s throughput over fiber system.

Contact us for more information about the OTR 1A42 fiber transmission system.